Script library

This script connects to all pod's in a Cloud Pod Architecture(CPA) or only the local one if CPA hasn't been initialized and pulls all health information for configured UAG's.
This action should be executed against a Horizon endpoint machine (one which has the HZ Primary Connection Server column populated in ControlUp Console). The script uses the target machine to determine the connection server address, and is executed on the machine running ControlUp Console.

Note: Requires PowerCLI 11.4 or higher and Horizon 7.10 or higher

Changes the amount VDI desktops in a desktop pool. Use UP_FRONT or ON_DEMAND for the Provisioningtype depending if you want to provision all desktops up front. If UP_FRONT is used minNumberOfMachines and numberOfSpareMachines will be ignored.

This action should be executed against a Horizon endpoint machine (one which has the HZ Primary Connection Server column populated in ControlUp Console). The script uses the target machine to determine the connection server address, and is executed on the machine running ControlUp Console.

This script requires VMWare PowerCLI to be installed on the machine running the script.
PowerCLI can be installed through PowerShell (PowerShell version 5 or higher required) by running the command 'Install-Module VMWare.PowerCLI -Force -AllowCLobber -Scope AllUsers'

Changes the amount of RDS hosts in a Horizon Farm.

This action should be executed against a Horizon endpoint machine (one which has the HZ Primary Connection Server column populated in ControlUp Console). The script uses the target machine to determine the connection server address, and is executed on the machine running ControlUp Console.

This script requires VMWare PowerCLI to be installed on the machine running the script.
PowerCLI can be installed through PowerShell (PowerShell version 5 or higher required) by running the command 'Install-Module VMWare.PowerCLI -Force -AllowCLobber -Scope AllUsers'

This Script Action checks if your Citrix ADC appliance is a VPX and if so, changes the cpuyield setting to YES to ensure no High CPU usage is reported on the hypervisor (see https://support.citrix.com/article/CTX229555)

Note: This script only changes the setting on the current ADC and most be performed on both nodes of a HA pair as the setting is node specific and not synchronized.

this Script Action checks if the suggested mitigation responder policy is configured and globally bound on the Citrix ADC or Citrix Gateway appliance as described in Citrix knowledgebase article CTX267679 (https://support.citrix.com/article/CTX267679).

Note: This Script Action does not perform the suggested mitigation for the management interfaces as it may break administration access.

Lists any profiles assigned to the IGEL device using the IGEL IMI Rest API.
Note: Given that the common practice for the UMS server is to use the self signed Certificate,
this script will ignore SSL errors.

Starts a VNC connection to the selected IGEL device

Updated to remove certificate requirements.

Tells the IGEL UMS to push a system configuration refresh to the target device
Send a configuration update to an IGEL device from the UMS using the IGEL IMI Rest API.
Note: Given that the common practice for the UMS server is to use the self signed Certificate,
this script will ignore SSL errors.

Instruct the IGEL UMS to send a wakeup command to the target device using the IGEL IMI Rest API.
Note: Given that the common practice for the UMS server is to use the self signed Certificate,
this script will ignore SSL errors.

Instruct the IGEL UMS to reboot the target device using the IGEL IMI Rest API.
Note: Given that the common practice for the UMS server is to use the self signed Certificate,
this script will ignore SSL errors.