When connecting to a remote session, the more graphics data sent the more bandwidth is needed.
While modern protocols like HDX and Blast adjust, when task workers have extremely low bandwidth available (less than 1 or 2 Mbps) they might benefit from a simple trick: Reduce the maximum frames per second sent instead of sacrificing image quality and/or responsiveness.
This script modifies the VMware Blast_VDI and Citrix sesison registry keys and therefore it is recommended to implement policies that would revert this to the desired defaults (periodically or upon reconnect)
View Script
While modern protocols like HDX and Blast adjust, when task workers have extremely low bandwidth available (less than 1 or 2 Mbps) they might benefit from a simple trick: Reduce the maximum frames per second sent instead of sacrificing image quality and/or responsiveness.
This script modifies the VMware Blast_VDI and Citrix sesison registry keys and therefore it is recommended to implement policies that would revert this to the desired defaults (periodically or upon reconnect)
Version: 4.5.14 •
Created: 2019-05-13 •
Modified: 2019-10-17
262
Sets the priority of all processes within a session to normal
View Script
Version: 1.3.3 •
Created: 2019-05-13 •
Modified: 2019-05-17
75
Sets the priority of all processes within a session to BelowNormal
View Script
Version: 1.5.5 •
Created: 2019-05-13 •
Modified: 2019-05-17
107
This script is designed to run from a management computer (ControlUp Console).
Using a WMI command generates on a remote computer an Inbound connection Rule in
Windows Firewall to allow a ControlUp agent deployment stuck at 85% to complete.
View Script
Using a WMI command generates on a remote computer an Inbound connection Rule in
Windows Firewall to allow a ControlUp agent deployment stuck at 85% to complete.
Version: 2.6.13 •
Created: 2019-05-01 •
Modified: 2020-11-13
This script is designed to enhance the login measurements in a computer using auditpol, wevutil and reg commands and complete the requisites for the Analyze Logon Duration Script.
It will additionally increase the size of the Group Policy and Print Service Event logs to retain the information for a couple of hours after login.
Important note: This script modifies the audit policies on a computer and should be used with caution. If in doubt consult with your IT Security team.
View Script
It will additionally increase the size of the Group Policy and Print Service Event logs to retain the information for a couple of hours after login.
Important note: This script modifies the audit policies on a computer and should be used with caution. If in doubt consult with your IT Security team.
Version: 2.1.5 •
Created: 2019-05-01 •
Modified: 2020-07-19
https://support.citrix.com/article/CTX247927
View Script
Version: 1.0.1 •
Created: 2019-04-23 •
Modified: 2019-04-23
137
Location of putty.exe, Computer IP and Username must be provided. Password is optional and a better recommendation is use a authorized key saved in putty's default settings (https://www.ssh.com/ssh/putty/putty-manuals/0.68/Chapter8.html)
You can download from https://www.putty.org
View Script
You can download from https://www.putty.org
Version: 2.8.37 •
Created: 2019-04-22 •
Modified: 2019-07-18
Gets a Users AD group membership
View Script
Version: 1.3.8 •
Created: 2019-04-11 •
Modified: 2019-04-11
$User
686
Retrieves the details of a process's parent process.
A WMI command is invoked to collect the Parent's PID and then used to filter tasklist results
Additional output options REMarked
View Script
A WMI command is invoked to collect the Parent's PID and then used to filter tasklist results
Additional output options REMarked
Version: 1.1.5 •
Created: 2019-04-03 •
Modified: 2019-04-03
This script finds Internet Explorer processes corresponding to tabs in which the URL matches the pattern provided by the user in the "Tab Title Pattern" argument, and kills these processes.
Internet Explorer may recover the killed tab automatically, which is a default behavior controlled by the the "Enable automatic crash recovery" setting. When set to "yes", the "Disable Tab Recovery" setting of this script will prevent the killed tab from getting reopened. Tab recovery will then remain disabled at the user level.
If the Force parameter is set to "yes", the script will terminate the processes it found, even if their count does not correlate to the number of tabs matching the provided pattern. Be advised that this option may result in closing more tabs than intended, and should be used with caution.
View Script
Internet Explorer may recover the killed tab automatically, which is a default behavior controlled by the the "Enable automatic crash recovery" setting. When set to "yes", the "Disable Tab Recovery" setting of this script will prevent the killed tab from getting reopened. Tab recovery will then remain disabled at the user level.
If the Force parameter is set to "yes", the script will terminate the processes it found, even if their count does not correlate to the number of tabs matching the provided pattern. Be advised that this option may result in closing more tabs than intended, and should be used with caution.
Version: 1.5.28 •
Created: 2019-04-01 •
Modified: 2019-04-10
Prompt the end user for a permission to forcefully terminate a process running in their session.
View Script
Version: 1.0.1 •
Created: 2019-03-20 •
Modified: 2019-03-20
This script will change the resource allocation of a given vSphere VM. By default, the allocation is increased one 'SharesLevel' for CPU, HDD, Memory or all three.
If the SharesLevel for a resource is 'Custom' this will not be changed. ALL hard disks will be set to a new SharesLevel based on the current level of the FIRST disk. Example, script is set to Increase level for All resources:
CPU SharesLevel 'Normal' ---> CPU ShareLevel 'High'
Memory SharesLevel 'Custom' ---> Memory SharesLevel 'Custom'
FIRST HDD SharesLevel 'Low', SECOND HDD SharesLevel 'Normal' ---> ALL HDD SharesLevel 'Normal'
View Script
If the SharesLevel for a resource is 'Custom' this will not be changed. ALL hard disks will be set to a new SharesLevel based on the current level of the FIRST disk. Example, script is set to Increase level for All resources:
CPU SharesLevel 'Normal' ---> CPU ShareLevel 'High'
Memory SharesLevel 'Custom' ---> Memory SharesLevel 'Custom'
FIRST HDD SharesLevel 'Low', SECOND HDD SharesLevel 'Normal' ---> ALL HDD SharesLevel 'Normal'
Version: 1.0.2 •
Created: 2019-03-19 •
Modified: 2019-03-19
Run WinDirStat (https://windirstat.net/) to analyze the usage of a drive.
If executed for a Logical drive that will be used.
If executed on a computer or session will be run for ALL Drives on that computer
View Script
If executed for a Logical drive that will be used.
If executed on a computer or session will be run for ALL Drives on that computer
Version: 1.10.35 •
Created: 2019-03-13 •
Modified: 2019-03-29
disk
free space
657
This script creates a video of the entire user display area and saves it in a location of choice. This script requires ffmpeg.exe to be downloaded and placed in an accessible location.
View Script
Version: 1.3.4 •
Created: 2019-03-13 •
Modified: 2019-03-27
This script gets the dimensions of the users working display area and takes screenshots. The screenshots can be saved as a BMP, JPG or PNG in a location of choice.
View Script
Version: 3.2.5 •
Created: 2019-03-13 •
Modified: 2023-03-20
This action is intended for detecting computers with misaligned system time. It is designed to be executed against a group of computers, comparing the difference between the current time and last midnight, by means of the built-in ControlUp SBA output comparison feature. If the clocks on all selected computers are in sync, you should get one output group.In a typical production-scale environment, a handful of computers may produce a non-standard output, which indicates a clock slip that probably causes authentication errors and other issues.
This script accounts for different time zones, so computers that are in sync but in different time zones should produce the same output.
View Script
This script accounts for different time zones, so computers that are in sync but in different time zones should produce the same output.
Version: 2.5.7 •
Created: 2019-03-12 •
Modified: 2019-03-17
This script will set the correct permissions on HKLMSOFTWAREMicrosoftSystemCertificatesAuthRoot to fix CAPI event id 4110 by allowing NT SERVICECryptSvc full control on the HKLMSOFTWAREMicrosoftSystemCertificatesAuthRoot registry key and it's children
View Script
Version: 2.5.9 •
Created: 2019-02-26 •
Modified: 2019-10-25
17
This script gets the dimensions of the users working display area and take a screenshot. The screenshot can be saved as a BMP, JPG or PNG in a location of choice.
View Script
Version: 2.3.5 •
Created: 2019-02-25 •
Modified: 2022-12-14